Panasonic PT-VW435NU

Network
ENGLISH -
73
Settings
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery. For more details, visit http://
www.amx.com/.
Press ▲▼ to select 1 ) [AMX D.D.].
Press 2 ) <ENTER> button or the ►
button to select [On] or [Off] to allow
the projector to be detected by AMX
Device Discovery.
RoomView
This function allows the projector to monitor and
control the projector through network with Crestron
RoomView
®
.
Press ▲▼ to select 1 ) [RoomView].
Press 2 ) <ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
This projector supports the following application
software from Crestron company.
• RoomView
®
Express
• Fusion RV
™
• RoomView
®
Server Edition
"Crestron RoomView" is a system developed by
Crestron Electronics, Inc. which collectively manage
and control multiple system devices connected via
the network, from a computer. This projector supports
"Crestron RoomView".
For details of "Crestron RoomView", refer to the Crestron
z
Electronics, Inc. website. (Provided only in English.).
http://www.crestron.com/.
For the download of "RoomView Express", refer to the
Crestron Electronics, Inc. website. (Provided only in
English.).
http://www.crestron.com/getroomview.
Memory viewer
Select [Network] in the main-menu and 1 )
then press ► or <ENTER> button.
Select [Memory viewer] with Point ▲▼ 2 )
buttons and press <ENTER> button.
Select [Start] and press <ENTER> 3 )
button.
* The image le stored in the root directory of the
USB thumb drive is displayed on the screen.
* If the image le is not available in the root
directory of the USB thumb drive, the memory
viewer browser window appears.
Note
The Memory Viewer function is available only when the
z
USB thumb drive is inserted, otherwise, it will grayout.
For details, see the “Memory Viewer function” of the
z
Network menu. (
Æ
page 90-93)
Network factory default
You can reset the network setting to the factory
default of the projector.
Press ▲▼ to select [Network factory 1 )
default], and press <ENTER> button.
A conrmation box appears and select 2 )
[Yes] and then press <ENTER> button.
Another conrmation box appears and
select [Yes] and then press <ENTER>
button.