Panasonic RF-800UGA - Disassembly of Rear Cabinet Block

13
6.4. Disassembly of Rear Cabinet
Block
Step 1 : Press the OPEN button to open the Battery Cover
Assembly.
Step 2 : Remove 5 screws.
Step 3 : Slightly lift up the Rear Cabinet Block.
Step 4 : Detach 2P cable at the connector (CN1) on the Tuner
P. C .B ..
Step 5 : Detach 6P cable at the connector (CN2) on the Tuner
P. C .B ..
Step 6 : Lift up to remove the Rear Cabinet Block.