This unit is equipped with features of self-diagnostic & special mode setting for checking the functions
& reliability.
Special Note : Checking of the reliability (ageing) & changer operation must be carry out to ensure good
working condition in unit.
8.1. Special Mode Table
Below is the various special modes for checking:-
Item FL Display Key Operation
Mode Name Description Front Key
Self -
Diagnostic
Mode
To enter into self
diagnostic
checking for main
unit.
1. Select [ ] for
mode (Ensure no tape is inserted).
2. Press and hold [
button for 3 seconds follow by
[ ].
To exit, press
button on main unit or remote
control.
CD Changer
Reliability
Test
To determine the
reliability of CD
Changer Unit.
(For more
information, refer
to section 8.1.2)
In doctor Mode:
1. Press [2] button on remote control..
To exit, press
button on main unit or remote
control.
13
To Next Page
Loading...
