Item FL Display Key Operation
Mode Name Description Front Key
Changer
Operation
To check the CD
Changer Operation.
(For more
information, refer
to section 8.1.7)
1. Tray 1 load, tray
2 open then close.
2. Tray 1 load, tray
3 open then close.
3. Tray 1 load, tray
4 open then close.
4. Tray 1 load, tray
5 open then close.
5. CD check mode
and then close.
6. Tray 1 load.
7. After the above
process,
[CHNGR_OK] shall
be displayed. If
there is no
problems. Error
codes will display
if errors occurs.
In doctor mode:
1. Press [DISC] button on remote control.
To exit, press [ENTER] button
remote control or
button on main unit or remote
control.
8.1.1. Cassette Mechanism Self-Diagnostic Mode
Below is information on the checking of cassette deck mechanism
16
To Next Page
Loading...
