EasyManua.ls Logo

Panasonic SC-HC37GN - Doctor Mode Table 2

Panasonic SC-HC37GN
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
8.3.2. Doctor Mode Table 2
Item
FL Display
Key Operation
Mode Name Description
Front Key
FL Display Test To check the FL segments
display (All segments will
light up)
In Doctor Mode:
Press [1] button on the remote control of
HC35.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press but-
ton on main unit or on the remote control
of HC35.
Volume Setting In Doctor Mode:
Press [7] button on the remote control of
HC35.
In Doctor Mode:
Press [8] button on the remote control of
HC35.
In Doctor Mode:
Press [9] button on the remote
control of
HC35.
Mecha Sliding Panel
Reliability
In Doctor Mode:
Press [ ] follow by [2] & then [1]
button on the remote control of HC35.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press but-
ton on main unit or on the remote control
of HC35.
To exit Doctor Mode, press but-
ton on main unit or on the remote control
of HC35.
To exit Doctor Mode, press but-
ton on main unit or on the remote control
of HC35.
To exit Doctor Mode, press but-
ton on main unit or on the remote control
of HC35.
To check the operation of
sliding Panel.
Sequence as follow :
1. CD Door set to CLOSE
position.
2. CD Door move to the left
(CD Open direction) and
stop at LEFT position for 1
sec.
3. CD Door move to the
right (CD Close direction)
and stop at CLOSE position
for 1 sec.
4. All the process above is
considered as 1 cycle. Step
(2) ~ (3) will repeat; Cycle
Counter display increase
every 1 cycle completed.
Refer to 8.3.5 for more
information
To check for preset volume
setting
Note : In tuner mode this
function is not possible

Table of Contents

Related product manuals