64
10.23.2. Assembly of Diode (D1700)
Step 1 : Apply grease to the heatsink unit.
Step 2 : Fix the Diode (D1700) onto SMPS P.C.B..
Step 3 : Fix the Diode (D1700) onto the heatsink unit with 1
screw.
Caution : Ensure the Diode (D1700) is fixed properly to the
heatsink.
Step 4 : Solder pins of the Diode (D1700).
Caution : Ensure the Diode (D1700) is seated properly onto
the SMPS P.C.B. before soldering.
10.24. Disassembly of Panel P.C.B. &
Button Ornament Unit
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 1 screw.
Step 2 : Lift up the Panel P.C.B. together with Button Ornament
Unit as shown.
Step 3 : Detach 18P FFC at the connector (CN900) on the But-
ton P.C.B..
To Next Page
Loading...
