83
11.3. Checking & Repairing of CD
Servo P.C.B.
Note : Insert CD before Checking the CD Servo P.C.B.
Step 1 : Remove the Base Stand Assembly.
Step 2 : Remove the Door Assembly.
Step 3 : Remove the Front Ornament Unit.
Step 4 : Remove the Front Panel Block.
Step 5 : Remove 1 screw.
Step 6 : Lift up the Panel P.C.B. with the Button Ornament Unit
as shown.
Step 7 : Place the Panel P.C.B. on the Support Block.
Step 8 : Remove 3 screws.
Step 9 : Lift up the CD Mechanism.
Step 10 : Detach 30P FFC at the connector (CN6006) on the
Main P.C.B..
To Next Page
Loading...
