60
10.22. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Lift up the 14P FFC.
Caution : The 14P FFC is pasted onto the SMPS Unit using
a double sided tape. During assembling, replace with new
one if torn.
Step 3 : Gently lift up the SMPS Unit.
Caution : During assembling, a “click” sound could be
heard when the SMPS unit is attached properly to the Main
P.C.B..
Step 4 : Remove the SMPS Unit.
To Next Page
Loading...
