Panasonic SC-HC37GN - Disassembly of Jack Lid

70
10.29. Disassembly of Jack Lid
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to (Step 1) - (Step 3) of item 10.24.
• Refer to “Disassembly of CD Mechanism”
Step 1 : Release the Jack Lid Spring.
Caution : Keep the Jack Lid Spring in safe place and place
them back during assembling.
Step 2 : Press to open the Jack Lid.
Step 3 : Push the shaft of the Jack Lid inwards in the direction
as shown.
Step 4 : Lift up to remove the Jack Lid in the direction as
shown.