81
Step 10 : Place the SMPS P.C.B. on the Insulating Material.
Step 11 : Connect 7P extension cable (REX1538) from P1700
on the SMPS P.C.B. to CN1100 on the Main P.C.B..
Step 12 : Check and repair the SMPS P.C.B. according to the
diagram shown.
11.2. Checking & Repairing of Panel
P.C.B.
Step 1 : Remove the Base Stand Assembly.
Step 2 : Remove the Door Assembly.
Step 3 : Remove the Front Ornament Unit.
Step 4 : Remove the Front Panel Block.
Step 5 : Remove 1 screw.
Step 6 : Lift up the Panel P.C.B. with Button Ornament Unit as
shown.
Step 7 : Place the Panel P.C.B. on the Support Block.
To Next Page
Loading...
