57
10.19. Disassembly of Upper Guide
Rail & Top Ornament
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Lift up & remove the Lighting Pieces as show.
Caution : Keep the Lighting Pieces in safe place and place
them back during assembling.
Step 2 : Remove 4 screws.
Step 3 : Release 3 catches.
Caution : During assembling, ensure the Upper Guide Rail
is fully catched to the Front Panel Block.
Step 4 : Remove the Upper Guide Rail & the Top Ornament.
To Next Page
Loading...
