56
10.18. Disassembly of Shutter & Shut-
ter Spring
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Press the catches inwards and push the Shutter down-
wards in order of sequences (1) to (2).
Caution : During assembling, ensure the Shutter is fully
catched.
Step 2 : Upset the Front Panel Block.
Step 3 : Remove the Shutter & Shutter Spring.
Caution : Keep the Shutter Spring in safe place and place
them back during assembling.
To Next Page
Loading...
