77
10.33. Disassembly of Front Speaker
(SP2)
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Front Ornament Unit”
• Refer to “Disassembly of Front Panel Block”
• Refer to (Step 1) - (Step 3) of item 10.24.
• Refer to “Disassembly of CD Mechanism”
Step 1 : Detach 2P wire at the connector (CN400) on the Main
P. C. B ..
Step 2 : Remove 4 screws.
Step 3 : Lift up the Front Speaker Assembly (R) using a Flat-
head screw driver.
Step 4 : Desolder the red (+) wire and black (-) wire at the ter-
minals on the Front Speaker (SP2).
To Next Page
Loading...
