50
10.14. Disassembly of Motor Assem-
bly
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Motor P.C.B.”
• Refer to (Step 1) of item 10.13.
Step 1 : Release 2 catches.
Step 2 : Remove the Motor Assembly.
Caution 1 : During assembling, align the Motor wire with
the indicated arrow as shown.
Caution 2 : During assembling, ensure the Motor Assembly
is fully catched & seated properly.
To Next Page
Loading...
