61
Step 5 : Lift up the Himelons.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 6 : Press to release 2 catches using a screwdriver and
gently push up the SMPS Shield Unit.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
Step 7 : Gently push up the SMPS Shield Unit to release the
catches.
Caution : During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
Step 8 : Remove the SMPS Shield Unit.
To Next Page
Loading...
