40
10.8.4. Disassembly of iPod Base
• Refer to “Disassembly of iPod Block”
• Refer to “Disassembly of iPod Support & iPod Spring”
Step 1 : Insert a flathead screwdriver below the iPod Base as
shown.
Step 2 : Push inwards and lift up to release the pivot of the iPod
Base.
Step 3 : Lift up the iPod Tap Tray Unit.
Caution : During assembling, a “click” sound is heard
when the iPod Tap Tray unit is properly fixed.
10.8.5. Disassembly of iPod P.C.B.
• Refer to “Disassembly of iPod Block”
• Refer to “Disassembly of iPod Support & iPod Spring”
• Refer to “Disassembly of iPod Base”
Step 1 : Remove 3 screws.
Step 2 : Remove the iPod P.C.B..
To Next Page
Loading...
