RQT9772
19
≥ Connect only after all other connections are completed.
≥
This system consumes a small amount of AC power (
>
30) even when it is turned off. In the interest of power
conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
By using the Bluetooth
®
connection, you can
listen to the sound from the Bluetooth
®
audio
device from this system wirelessly.
Preparation
≥ Turn on the Bluetooth
®
feature of the device
and place the device near the main unit.
Press [ ] to select “ ”.
≥ If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ”
indicator flashes quickly.
≥ If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB170” from the
Bluetooth
®
device’s Bluetooth
®
menu.
≥
If prompted for the passkey on the Bluetooth
®
device, enter “0000”.
≥ Once the Bluetooth
®
device is connected, the “ ”
indicator stops flashing and lights up.
≥
You can register up to 8 devices with this system. If a 9th device is paired,
the device that has not been used for the longest time will be replaced.
Press [ ] to select “ ”.
≥ If the “ ” indicator lights, a Bluetooth
®
device is already
connected with this system. Disconnect it. (> below)
Select “SC-HTB170” from the
Bluetooth
®
device’s Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes
slowly.
≥ When “ ” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth
®
device.
≥ The Bluetooth
®
device will be disconnected if a different
audio source (e.g. “TV“) is selected.
≥
Refer to the operating instructions of the Bluetooth
®
device for
further instruction on how to connect a Bluetooth
®
device.
≥ This system can only be connected to one device at a
time.
≥ To change the sound quality, refer to “Bluetooth
®
communication mode” on page 23.
AC mains lead connection
A To a household
mains socket
B AC mains lead
(supplied)
For customers in United Kingdom and Ireland
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
Saving energy
The main unit is designed to conserve its power consumption and save energy.
≥
The main unit will automatically switch to standby mode when no signal is input and no operation is
performed for approx. 2 hours. Refer to page 24, “Auto standby function” to turn this function off.
AC IN
Bluetooth
®
connection
Bluetooth
®
pairing
Connecting a Bluetooth
®
device
SC-HTB170EGEBGN_RQT9772-B.book 19 ページ ２０１３年２月４日 月曜日 午前９時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
