Operations
RQT9772
23
Advanced operations
To display the current audio format.
Press and hold [SOUND] for more than
4sec.
≥ The current audio format is indicated for 5 sec.
Audio format is not indicated when “” is selected as the
source.
Change the dual audio from main to secondary.
≥ This setting will only work if the audio output
setting on the connected TV or player, etc. is
set to “Bitstream” and dual audio is available in
the audio source.
Press and hold [MUTE] for more
than 4 sec.
While the setting is displayed, press
[MUTE] to change the setting.
≥ The setting changes each time [MUTE] is pressed.
≥ The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥ The setting is maintained until it is changed again.
With this function, you can prevent sudden loud
sounds. The output will be reduced automatically
when the input exceeds a certain level.
Press and hold [INPUT SELECTOR] on
the remote control for more than 4 sec.
While the setting is displayed, press
[INPUT SELECTOR] on the remote
control to change the setting.
≥ The setting changes each time [INPUT SELECTOR] is
pressed.
≥ The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥ The setting is maintained until it is changed again.
You can select different modes to suit the type of
connections with emphasis on connectivity or
high quality audio.
≥ Make sure that a Bluetooth
®
device is already
paired with this system. (> 19)
Press [ ] to select “ ”.
≥ “” indicator will blink slowly. If the indicator lights, a
Bluetooth
®
device is already connected with this system.
Disconnect it. (> 19)
Press [ ] to display the current mode.
While the mode is displayed, press
[ ] to select the mode.
≥ The setting changes each time [ ] is pressed.
≥ The indicator for the selected setting blinks for 10 sec and
then exits the setting mode.
≥ The setting is maintained until it is changed again.
Audio format indicator
“STADIUM” indicator blinks:
Dolby Digital is the audio format.
“MUSIC” indicator blinks:
DTS is the audio format.
“CINEMA” indicator blinks:
PCM is the audio format.
Changing the dual audio
“STANDARD” indicator blinks (A):
Main (Factory preset)
“STEREO” indicator blinks (B):
Secondary
(SAP: Secondary Audio Program)
When A and B both blink: Main and
secondary
Auto gain control
“STANDARD” indicator blinks:
Auto gain control is on.
“STEREO” indicator blinks:
Auto gain control is off.
(Factory preset)
Bluetooth
®
communication mode
“STANDARD” indicator blinks:
MODE1 (Factory preset)
Emphasis on connectivity
“STEREO” indicator blinks:
MODE2
Emphasis on audio quality
SC-HTB170EGEBGN_RQT9772-B.book 23 ページ ２０１３年２月４日 月曜日 午前９時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
