Operation
SF4C Safety light curtain
96
NOTE
1. The figure shows the status of the emitter/receiver indicators during
operation when you are using a PNP output. When you are using an NPN
output, the NPN indicator lights up orange.
2. Since the color of the operation indicator changes according to whether the
control outputs (OSSD 1, OSSD 2) are ON or OFF, the operation indicator on
the light curtain is marked 'OSSD'.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG
To Next Page
Loading...
