Panasonic SF4C Series - Dead Zoneless Mounting

Before Using this Device
SF4C Safety light curtain
28
4. Set the multifunctional mounting bracket on the mounting surface using
either two hexagon-socket head bolts (M6) or four hexagon-socket head
bolts (M4)
SF4C
Hexagon-socket
head bolt
Hexagon-socket
head bolt

NOTE
SF4C-H28□ and SF4C-H32□ require the multifunctional intermediate supporting
bracket MS-SFC-4 (optional) (see page 31).
2.5.3 Dead Zoneless Mounting
You can mount the safety light curtain with the multifunctional mounting bracket MS-SFC-3 so
that no dead zone exists, follow this procedure.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG