Panasonic SF4C Series - Y-Type Connector; Brackets; Standard Mounting Bracket MS-SFC-1; NA2_N Compatible Mounting Bracket

Specifications and Dimensions
SF4C Safety light curtain
118
7.3.1.3 Y-Type Connector
You receive 1 piece.
Model No. Remarks
SFC-WY1
This is a connector which can organize the emitter and receiver cables of the
intermediate connector type of the light curtain SF4C-H□-J05. When connecting to
the control unit SF-C13 or a safety PLC, it is allowed to connect as wire-saving.
Use it with one of the cables shown below:
Cable with the connector on one end WY1-CCN3, WY1-CCN10: 1 pc.
7.3.2 Brackets
The following brackets are available.
7.3.2.1 Standard Mounting Bracket MS-SFC-1
You receive 4 pieces/set.
Model No. Remarks
MS-SFC-1
Fix it with one hexagon-socket head bolt [M5].
7.3.2.2 NA2_N Compatible Mounting Bracket
You receive 4 pieces/set.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG