Panasonic SF4C Series - Mounting the Intermediate Supporting Bracket MS-SFC-4

SF4C Safety light curtain
2.5 Mounting
31
2.5.4 Mounting the Intermediate Supporting Bracket MS-SFC-4
If you want to mount the multifunctional intermediate supporting bracket MS-SFC-4, follow this
procedure:
1.
2.
3.
Procedure
1. Make sure that the standard mounting bracket (MS-SFC-1) is not attached at
the safety light curtain, otherwise loosen it.
2. Slip on the multifunctional intermediate supporting bracket MS-SFC-4
(optional) from the top or from the bottom of the device.
SF4C
Multifunctional
intermediate supporting
bracket MS-SFC-4
(Optional)
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG