Before Using this Device
SF4C Safety light curtain
30
5. Tighten the two hexagon-socket head bolts for beam-axis alignment M3
(length 5mm). The tightening torque should be 0.2N·m
Part A
Part B
6. Set the multifunctional bracket on the mounting surface using either two
hexagon head bolts (M6) or four hexagon head bolts (M4).
SF4C
SF4C
Hexagon head bolts
Hexagon head bolt
NOTE
SF4C-H28□ and SF4C-H32□ require the multifunctional intermediate supporting
bracket MS-SFC-4 (optional) (see page 31).
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
AG
To Next Page
Loading...
