Panasonic SF4C Series - Operation of Large Multi-Purpose Indicator

Before Using this Device
SF4C Safety light curtain
14
2.3.2 Operation of Large Multi-Purpose Indicator
You have different settings available for the large multi-purpose indicator with the handy
controller SFC-HC (optional), see page 84. One mode can be selected from the following eight
mode number
s. Factory setting is mode 0.
Large multi-purpose indicator input
1/2
OSSD 1/2
Muting
function
Override
function
Mode
PNP
output:
ON
NPN
output:
OFF
PNP
output:
OFF
PNP
output:
ON
ON OFF Active Inactive
0
Lights up red Lights up green –- –- –- –-
1
Blinks red Blinks green –- –- –- –-
2
Lights up red Blinks green –- –- –- –-
3
Blinks red Lights up green –- –- –- –-
4
Lights up red Blinks red –- –- –- –-
5
Blinks green Lights up green –- –- –- –-
6
–- –- Lights up
green
Lights
up red
Blinks green –-
7
Lights up red Blinks red –- –- Lights up
green
Blinks green
REFERENCE
Further information regarding the functionality of the handy controller you find
in the operation manual for the handy controller or see page
84.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG