Introduction
SF4C Safety light curtain
6
1.3 Applicable Standards and Regulations
This device complies with the following standards and regulations.
• EU Machinery Directive 98/37/EC, EU Machinery Directive 2006/42/EC, EMC Directive
2004/108/EC
• EN 61496-1 (Type 4), EN 55011
• IEC 61496-1/2 (Type 4), ISO 13849-1:2006 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
• JIS B 9704-1/2 (Type 4), JIS B 9705-1 (ISO 13849-1) (Category 4), JIS C 0508-1 to 7
(SIL3)
• UL 61496-1/2 (Type 4), UL 508, UL 1998 (Class 2), CSA 61496-1 / 2 (Type 4), CSA
C22.2 No.14
• OSHA 1910.212, OSHA 19 10.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
NOTE
• Conformity to JIS, OSHA and ANSI for this device has been evaluated by us.
•
: This device conforms to the EMC directive and the Machinery
directive. The CE-mark indicates that this product conforms to the EMC
directive.
•
: This device is certified by TÜV Süd.
•
: The C-CL US Listing Mark indicates compliance with both
Canadian and U.S. requirements.
• If you want to use this device in a location other than already described (see
page 3), confirm first that the intended use complies with the standards or
regulations applicable in
your region or country.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG
To Next Page
Loading...
