EasyManua.ls Logo

Panasonic SF4C Series - Page 120

Panasonic SF4C Series
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SF4C Safety light curtain
7.2 Common Specifications
115
Type Cable type Pigtailed type
Model No.
SF4C-H-
SF4C-H--J05
Degree of protection IP65 and IP67 (IEC)
Degree o f pollution 3
Ambient temperature -10 to +55°C (No dew condensation or icing allowed), storage: -25 to +60°C
Ambient humidity 30 to 85% RH, storage: 30 to 95% RH
Allowed ambient light Incandescent lamp: 5,000lx or less at the light-receiving surface
Operating altitude 2,000m or less
Withstand voltage 1,000V AC for one min. (between all supply terminals connected together and
enclosure)
Insulation resistance
20MΩ or more with 500V DC (between all supply terminals connected together and
enclosure)
Vibration resistance 10 to 55Hz frequency, 0.75mm amplitude in X, Y, and Z directions for two hours each
Shock resistance 300m/s
2
acceleration (30G approx.) in X, Y, and Z directions for three times each
Emitting element Infrared LED (Peak emission wavelength: 855nm)
Connection method Connection with connectors
Cable 0.15mm
2
12-core heat resistant PVC cable,
5m long
0.15mm
2
12-core heat-resistant PVC
cable with connector, 0.5m long
Cable extension An extension up to a total of 40,5m is possible for cables with a strength of 0.2mm
2
ore
more (note 3)
Material
Enclosure: Polycarbonate alloy
Sensing surface: Polycarbonate alloy
MS-SFC-1 (standard mounting bracket): stainless steel
Accessory
MS-SFC-1 (Standard mounting bracket): 1 set
SF4C-TR25 (test rod): 1 pc.
Applicable standard
EN 61496-1 (Type 4), EN 55011, EN 61000-6-2, EN50178, EN ISO 13849-1: 2006
(Category 4, PLe), IEC 61496-1/2 (Type 4), ISO 13849-1: 2006 (Category 4, PLe), IEC
61508-1 to 7 (SIL3), JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508
(SIL3), ANSI/UL 508, UL 1998 (Class 2)
NOTE
1. The beam channel is not turned OFF during muting even if it is blocked.
2. When the blanking function is activated, the operation mode is changed.
3. When the muting lamp is used, the cable can be extended up to 30.5m (for
emitter/receiver).
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG

Table of Contents

Other manuals for Panasonic SF4C Series

Related product manuals