SF4C Safety light curtain
2.6 Wiring
41
• When this device is used in conformity with the Korean S-mark, the power
wire to be connected to this device should be less than 10m long.
Pin arrangement for emitter and receiver
Extension cable with connector on one end Extension cable with connectors on both ends
Pin arrangement for emitter and receiver
Side A
Side BSide A
Side A
Side BSide A
Pin assignment on the A and B side connectors
Cable/connector
color
Pin No. Lead wire color Description
1 Pale purple Interlock setting input
2 Brown +V
3 Pink Test input/Reset input
4 Green/Black Auxiliary output
5 Orange Synchronization +
6 Orange/Black Synchronization -
7 Blue 0V
8 (Shield) Output polarity setting wire
9 Gray Safety input 1
10 Gray / Black Safety input 2
11 Yellow Override input
Emitter
Gray/Gray
12 Red Muting lamp output
1 White Control output 2 (OSSD 2)
2 Brown +V
3 Black Control output 1 (OSSD 1)
4 Green External device monitor input
5 Orange Synchronization +
6 Orange/Black
Synchronization －
7 Blue 0V
8 (Shield) Output polarity setting wire
9 Gray Large multi-purpose indicator
input 1
10 Gray / Black Large multi-purpose indicator
input 2
11 Sky-blue / White Muting input 1
Receiver
Gray (with black
stripe)/Black
12 Sky-blue / Black Muting input 2
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG
To Next Page
Loading...
