Functions
SF4C Safety light curtain
68
In case of using lead wires other than those described below, perform wiring depending on your
application. For details on wiring, see "Wiring" on page 34.
Emitter of the device Receiver of the safety sensor
Safety input wire 1 (gray) Control output 1 (OSSD 1) wire (black) or control output 2 (OSSD 2) wire
(white)
Safety input wire 2 (gray/black) Control output 2 (OSSD 2) wire (white) or control output 1 wire (black)
+V wire (brown) +V wire (brown)
0V wire (blue) 0V wire (blue)
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SEN
TRONIC
AG
To Next Page
Loading...
