9 Serviceman Mode
9.1. How to enter into Serviceman Mode
While pressing [VOLUME ( - )] button of the main unit, press [RECALL] button of the remote control three times within 3 seconds.
9.1.1. Key command
“1” button...Main items Selection in forward direction
“2” button...Main items Selection in reverse direction
“3” button...Sub items Selection in forward direction
“4” button...Sub items Selection in reverse direction
“VOL” button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
9.1.2. Cancellation
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
9.2. Contents of adjustment mode
·
Value is shown as a hexadecimal number.
·
Preset value differs depending on models.
·
After entering the adjustment mode, take note of the value in each item before starting adjustment.
Main item Sub item Sample Data Remark
PCT-ADJ CONT GAIN 200
COLOR 38
TINT 05
BRIGHT 7FB
RFAGC1 74
AGCADJ1 FIX
RFAGC2 74
AGCADJ2 FIX
WB-ADJ R CUT 80
G CUT 80
B CUT 80
R DRV EC
G DRV FC
B DRV DB
ALL CUT 80
ALL DRV FC
WB BRG 804
OPTION SD BOOT ROM
OPT00 01
ANT-POW OFF
POF-SET NORMAL
STB-SEC SEC
EMGCY OFF
EEP COPY ALL
CLK MODE 00
CLOCK 80
CEC-CHK OFF
RM-SET CODE A
STB-CAS - -
32
TH-37PX60U / TH-42PX60U
To Next Page
Loading...
