153
4.6.3 Dialing Problems
START
END
No
Yes
Does the unit proceed to
Phase B?
1. Set documents on the ADF correctly.
4. Refer to Sect. 4.6.
3. The called party is busy.
2. Check the telephone line connection.
Are you using One-Touch dialing
or ABBR. dialing?
Are you using direct dialing?
No
Yes
Check the registered telephone number.
Is the Monitor Volume too loud or
too low?
No
Yes
Check the dialed telephone number.
No
Yes
Adjust the monitor volume using the Clear and
Set buttons.
To Next Page
Loading...
