Panasonic UF-890 - Page 154

154
4.6.4 Transmission Problems
START
END
Yes
No
Does the ID display?
1. No ID function at the remote unit.
2. The ID is not set for the remote unit.
Does the Verification Stamp
operate?
Is the copy quality OK?
Yes
No
1. Set "STAMP=ON"
2. Check CN8 (FCB PCB).
3. Replace the Stamp Solenoid.
4. Replace the FCB PCB.
Any other problems?
Yes
No
Make a copy and refer to Sect. 4.4.16
Yes
No See Sect. 4.3 (Troubleshooting using
information codes).