Panasonic UF-890 - Recording Paper Specifications

155
4.6.5 Reception Problems
START
END
Yes
No
Does the machine answer the
Ringing signal?
1. Set "RCV = AUTO".
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing or DRD setting.
5. Check the recording paper path.
6. Check CN3 (FCB PCB) and CN25 (LCU PCB).
7. Replace the LCU PCB.
8. Replace the FCB PCB.
Is the received copy OK?
Any other problems?
Yes
No
Make a copy and refer to Sect. 4.4.14.
Yes
No
See Sect. 4.3 (Troubleshooting using
information codes).