107
LSQT1150
With a computer (VDR-D310/VDR-D230)
12
Click [Burning].
Writing to the disc starts.
When writing is complete, the disc is ejected
automatically.
≥ The DISC EJECT lever on this unit does not
work when the unit is connected to a computer.
Use the software’s eject button to eject the
disc. (When not using the software, use
Windows Explorer to right-click the drive icon
for this unit and select [Eject].)
≥ Title names set using DVD-MovieAlbumSE
cannot be displayed on this unit. Also, the
names of playlists created on this unit cannot
be displayed on DVD-MovieAlbumSE.
≥ If you export an image recorded in 16:9 aspect
ratio with DVD-MovieAlbumSE, it is saved as a
4:3 aspect image that has been squeezed
horizontally.
If you then use the exported image with
DVDfunSTUDIO, it is displayed as a 16:9
aspect image.
≥ The DVD menu created with DVDfunSTUDIO
does not appear on this unit. Play back the disc
on a DVD player.
≥ You cannot add data to a disc written to with
DVDfunSTUDIO as the disc is finalized after
writing.
Take care that the temperature of the unit,
when connected to a computer, does not
rise excessively (reference for usage:
approx. 30 minutes at about 30 °C (86 °F)).
LSQT1150.book 107 ページ ２００７年１月１９日 金曜日 午前９時２７分
To Next Page
Loading...
