Panasonic VL-MV26 Installation Guide

Replace from Intercom system (mesh type PVC cable)
Room
Lobby
Continuously using the mesh type PVC wire
(less than 30m from Raiser)
Raiser
Replace exiting PVC cable to CAT6 cable
from Control Box to each distribution box.
Exiting Fermax Lobby
Station have camera.
But room monitor
do not support Video.
Back board will be also replaced soon
for new Lobby Station.
AC
220V
using 2 wire (Existing cable is 7 wire)
Replace
78

Panasonic VL-MV26 Specifications

General

Brand	Panasonic
Model	VL-MV26
Category	Intercom System
Language	English