Panasonic WV-SC385 - Detach the Camera

Step 4
Rotate the camera counterclockwise to detach the cam-
era from the camera mount bracket (accessory).
Important:
• When detaching the camera from the camera mount
bracket, hold the base of the camera. Detaching the
camera while holding the moving part may result in
malfunction.
Step 5
Detach the cables from the camera.
Step 6
Detach the safety wire from the camera.
Detach the camera
The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions
below.
Important:
• Do not detach the camera in a different way from the one described below. It may damage the camera.
Step 1
Rotate the decorative cover (accessory) counterclockwise
until the indication "OPEN" reached the decorative cover
guide of the camera mount bracket (accessory). Detach
the decorative cover.
Step 2
Detach the 12 V DC power cable plug (accessory) and the
LAN cable from the camera, and then turn off the power
of the camera.
Step 3
Remove the fixing screw (accessory) that is fixing the
camera on the camera mount bracket (accessory).
Do not lose the fixing screw.
LOCK
WV-SC385
OPEN
LOCK OPEN
LOCK OPEN
Decorative cover guide
20 °
Rotate
Camera mount bracket
(accessory)
Base part
Moving part
Main body of
the camera
25