Standard accessories
Installation Guide (this document) ....................................1 set
Warranty card ..................................................................1 set
CD-ROM*
1
.......................................................................1 pc.
Code label*
2
....................................................................1 pc.
*1 The CD-ROM contains the operating instructions and different kinds of tool software programs.
*2 This label may be required for network management. The network administrator shall retain the code label.
The following parts are used during installation procedures.
Camera mount bracket (w/safety wire) .............................1 pc.
Camera fixing screw ................................ 2 pcs. (incl. 1 spare)
Decorative cover ..............................................................1 pc.
Power cable plug .............................................................1 pc.
Optional accessories
Wall Mount Bracket WV-Q154S (Smoke dome type)
WV-Q154C (Clear dome type)
Ceiling Embedding Bracket WV-Q155S (Smoke dome type)
WV-Q155C (Clear dome type)
Ceiling Mount Bracket WV-Q156S (Smoke dome type)
WV-Q156C (Clear dome type)
WV-Q105A
Inner Cover WV-Q157
User License Accessory (For MPEG-4) BB-HCA5A
BB-HCA5CE
User License Accessory (For H.264) BB-HCA8A
BB-HCA8CE
Important:
• When using an inner cover provided with optional mount brackets, upper side of images will be hidden (become black)
when the tilt angle of the camera is almost level. (When "–5°" is selected for "Tilt Angle" on the setup menu, upper half
of images will be hidden.) In this case, images may also be washed out depending on the photographic subject when
"On" is selected for "AGC" on the setup menu.
Refer to the Operating Instructions (included in the CD-ROM) for further information about the setup menu.
37
To Next Page
Loading...
