Frequently Asked Questions
Q:
How do I set up
my
Digital Photo Frame?
A:
It is very simple to get your Digital Photo Frame out
of
the box and
running
in
just a
few
minutes. Just plug the power adapter into the
Digital Photo Frame and into a standard Wall Socket. Insert a
memory card into the appropriate card slot on the side
of
the Digital
Photo Frame, and turn it on. Your first slide show will automatically
start to play.
Q:
What memory cards can the Digital Photo Frame Read?
A:
Compatible
memory
cards include Secure Digital, MultiMedia Card,
Compact Flash, Memory Stick, MemoryStick Pro, Memory Stick Duo,
Memory Stick Pro Duo, and XD card.
Q:
I set up the Digital Photo Frame; why won't it turn on?
A: The Adapter is not securely connected to the Photo Frame or the
Power Switch is not on.
Q:
I have a memory card
in
the Digital Photo Frame;
why
can't I view
my photos?
A:
First, make sure that the memory card is one
of
the formats listed
above and that the files on the card are JPEG images files. Second,
turn the Digital Photo Frame
Off
and make sure that the memory
card is inserted all the
way
into the card slot and is facing the right
direction. Third, turn the Frame On. After a couple
of
seconds, you
should see your first photo. Press Exit to open the Card Selection
screen and select the card. Then select Photos. You should see the
Thumbnails screen listing all photos on the card.
If
you don't, you
may want to try another card.
Note: Some digital cameras save images
in
other formats. Please refer
to your camera's manual if your photos are not
JPEG
files.
Q:
Why is the picture display slower with some pictures and faster with
others?
A:
Higher resolution pictures load more slowly. Try using lower
resolution pictures
or
down sampling your images. See your
camera's operating manual for details on down sampling your
photos.
Q:
Can I insert multiple memory cards?
24
To Next Page
Loading...
Need help?
General
