Setting Up the Digital Photo Frame
The Digital Photo Frame is easy to set
up.
Just follow these steps:
1.
Plug the AC Power Adapter into the Digital Photo Frame and into a
wall outlet.
2.
Insert a memory card into the appropriate slot.
Slot 1 - Compact Flash™
Slot 2 - Secure Digital™ or MultiMedia Card
TM,
MemoryStick™, MemoryStick ProTM, or xD Memory
Card™
(MemoryStick Pro Duo required MemoryStick™ adapter)
le
Bu
on
--
SDI
CI
S 0
($lot2)
:-----
CF
1111(50
1)
Mini USB
Brl htne
LI
Out
P
rS
ich
OC9V
Adj table S nd
Note: The card will only fit
in
one direction; do not force
it.
The card
should fit snugly when properly inserted.
3.
Slide the POWER button on the left side of the Digital Photo Frame
up,
the Digital Photo Frame will power
on
and automatically start a
slideshow of the photos
on
the card. Slide the POWER button down
to
power off.
4.
To display photos individually, press the EXIT button
on
the remote
control to pause slideshow.
5.
Press of Exit button will display thumbnail screen. Use the directional
arrows to choose a photo. Press the
Enter
on
the top of the Digital
Photo Frame, on the remote control. The selected photo is displayed
on
the Digital Photo Frame.
Note: Pull the plastic tab sticking out
of
the remote control. It protects
the battery, and the remote control will not work unless it
is
removed.
6
To Next Page
Loading...
Need help?
General
