Pandigital Digital Photo Frame - COPY IMAGES FROM CAMERA MEMORY CARD ONTO INTERNAL MEMORY; COPY IMAGES FROM YOUR PC ONTO INTERNAL MEMORY

C Y IMAGES FROM CAMERA MEMORY CARD ONTO INTERNAl MEMORY
. Select the type of media
you would like to display
(i.e. Photo, Music, Video).
@Image has now
been transferred
to internal memory
Highlight the card you
inserted with the images
on it and press "ENTER"
on the remote.
Press "EXIT" on the
remote until you reach
the
"SELECT CARD"
screen.
Insert a camera memory
card into one
of the open
slots
Press the
"SETUP" button
on the file to bring up the
on-screen display.
Using the
"ARROW KEYS"
on the remote, scroll down
to "Copy File" and press
the "ENTER" button.
When prompted "Are you
sure?", use the
"ARROW
KEYS" to highlight "YES"
and press the "ENTER"
button.
COpy IMAGES FROM YOUR PC ONTO INTERNAl MEMORY
Connect the small end of
the USB cable to the USB
port on the back of the
Digital Photo Frame.
Connect the larger end
of
the USB cable to an
available
USB port on your
computer.
®
Be sure to give the
computer a few
minutes to recognize
the external device.
Some computers may not
recognize
the external device
on the first try. If after a few
minutes, the external driver's
are not seen, unplug the
USB cable, turn the frame off
and then on and repeat the
process.
@
3 new driver letters will
J appear under the "My
Computer" icon
in
Windows, one for each
of the memory card slots on
the Digital Photo Frame and
the one with "Pandigital" label
is for
the internal memory.
Repeat until you
have copied all
desired images to
the frame.
Devices with Removable Storage
I DVD Drive (0:) CD Drive
• DVD-RW Drive (E:) CD Drive
Removable Disk
Digital Pies
~:(iIII~ Sd Card (F:)
Double-click on the
appropriate driver letter with
"Pandigital" label to access
the internal memory.
Open the folder
on your
computer
that contains
the images you wish to
copy to the frame.
Highlight the image
you want to
copy to the frame and drag and
drop the file to the
"Pandigital" drive.
The remote and frame function buttons will not operate when connected to a
PC with the USB cable. Disconnect the
USB cable before trying to operate the frame. It may be necessary to power off and then power on the frame to
resume normal functions.
CUSTOMER SERVICE
Updated manuals can be accessed via our web site
Web Site: http://www.pandigital.net
Toll Free Number: 1-800-715-5354
QSG7200Mv1