Pantech Breakout - Setting End Point and Checking Traffic

122
LOCATION-BASED SERVICES
SETTING THE END POINT MANUALLY
1 Touch Apps from the Home Screen. Touch Maps .
2 Press the Menu Key B and touch Directions.
3 Touch to the right of End point.
4 Touch Point on map if you want to set the end point.
5 Touch a point on the map.
6 Touch Tap to select this point.
7 Touch , or , and touch Get directions.
Note You can also set your location following the same process.
CHECKING THE TRAFFIC CONDITIONS
1 Press the Menu Key B and touch Route Info while Navigation is running.
2 Swipe the screen along the suggested route to the destination.
Depending on the traffic conditions, the road appears in green (good),
yellow (congested) or red (jammed).
3 Touch and touch the route if you want to set an alternative route.