23
GETTING STARTED
USING THE HEADSET JACK
You can control your device’s accessories by inserting the connector into the 3.5mm Headset Jack on
your phone.
Note Stereo earphones that support common call management features including making and answering calls
may not have been standardized. Therefore the phone may not be compatible with some stereo earphones.
GRIPPING Breakout™
It is strongly recommended that you hold the Breakout™ in the right position for a call as indicated
below:
Correct Incorrect
x Make sure not to block the antenna embedded in the Breakout™. Check the location of the antenna
on the illustration on page 21.
x Do not wear metal accessories on your hand: it can affect the quality of calls.
To Next Page
Loading...
