Arming Page 15
3) If you have access to more than one area, enter the
area’s
number, or use the [] and [] buttons and
press [
ENTER].
4) Enter the time you want the area to be armed
according to the 24-hour clock (e.g., 9 a.m. is 09:00 and
9 p.m. is 21:00).
5) Press [
ENTER] to save and exit.
No Movement Auto-Arming
Your system can be programmed to send a report to your
monitoring station and/or arm the system if there is no
activity in the area during a specified period of time. Your
installer can set No Movement Auto-Arming to function
in either Regular or Stay arming mode.
To Next Page
Loading...
