Page 10 Overview
will start beeping when opened (HH:MM). Enter the
time that the chimed zone(s) will stop beeping when
opened (HH:MM).
4) Press
[
CLEAR
]
to exit chime programming.
Panic Alarms
Your system can be programmed to send an alarm to your
monitoring station to request help from the police, a
medical facility, the fire department, or a telephone
number of your choosing. To generate a panic alarm,
press and hold the panic buttons displayed in Table 1.
Your installer can program the alarm to be either silent or
audible.
Table 1: Panic Buttons
Command Functions
You will only need to use the Command Functions upon
your installer’s or monitoring station's request. Only the
System Master Code or user codes with the Master
feature enabled will be able to access these functions.
To access the Command Functions, press [
MENU] > [9]
SETTINGS > [6] COMMANDS.
Panic Alarm Types Panic Buttons
Emergency Panic
Press & hold
Auxiliary Panic
Press & hold
Fire Panic
Press & hold
To Next Page
Loading...
Need help?
General
