Trouble Display Page 31
Chapter 7: Trouble Display
Trouble Display
If your system experiences any problems, Trouble(s)
press Menu>5 will appear on the screen. The Trouble
Display will only display the troubles that occur in the
area(s) to which the keypad has been assigned.
To view the Trouble Display:
1) Press [
MENU] > [5] VIEW TROUBLE.
The Group Heading with the trouble will appear on
the screen. Use the [] and [] buttons to scroll
through the Groups experiencing a trouble.
2) Press the [
NUMBER] of the trouble you wish to view.
Aside from setting the date and time (clock loss), if any
troubles occur, we strongly suggest that you contact your
installer immediately to have your system serviced. For
information on setting the time and date, refer to Setting
Time & Date on page 7.
Group 1: System
•[1] AC Failure
•[2] Battery Failure
• [3] Aux. Failure
•[4] Bell Limit
• [5] Bell Missing
• [6] ROM Error
• [7] RAM Error
Group 2: Communicator
•[1] TLM1
• [2] to [5] Fail to Communicate (1 to 4)
• [6] Fail to Communicate PC
Group 3: Module Trouble
•[1] Tamper
• [2] ROM Error
• [3] TLM Trouble
• [4] Fail To Com
To Next Page
Loading...
