Page 32 Trouble Display
•[5] Printer
•[6] AC Failure
•[7] Battery Failure
• [8] Low Supply
Group 4: Network Trouble
• [1] Missing Keypad
• [2] Missing Module
•[3] Lost Voice Mdl.
• [6] General Failure
•[7] Network OverLd
Group 5: Zone Tamper
Group 6: Zone Low Battery
Group 7: Zone Fault
Group 8: Clock Loss
• The time and date have been reset to the default.
Clock Lost [8] to view will appear in the trouble menu.
Refer to Setting Time & Date on page 7.
Group 9: GSM Troubles
• [1] Missing GSM Module
• [2] GSM RF Jam Supervision
•[3] No Service
• [5] to [8] Fail to Communicate (1 to 4)
• [9] IP Receiver Unregistered
Group 10: IP Troubles
• [1] Missing IP Module
•[2] No Service
• [3] to [6] Fail to Communicate (1 to 4)
• [7] IP Receiver Unregistered
History Log
The History Log will record the user-initiated actions that
occurred in your system as well as any alarms or troubles
(e.g., “Access Granted”). By default, you will be able to