Page 19
Firmware Upgrades
Chapter 5: Firmware Upgrades
The following sections guide you through the steps required
when upgrading the PCS300 Universal IP Reporting Module’s
firmware. Firmware can be upgraded either on-site with a
connection to the network (IP) or remotely via the IP or GPRS
network using the GPRS12 Module.
The firmware is upgraded using the In-Field Paradox Upgrade
Software application. From this application, you can specify
the PCS300 Module to upgrade and which software version to
install. When you confirm the update, the PCS300 will be
upgraded with the selected version within minutes.
Accessing the In-Field Paradox Upgrade
Software Application
In order to access In-Field, the application must first be
installed on your hard drive. In-Field is available for download
from the Paradox website at www.paradox.com.
To Access In-Field
1) Locate the InField.exe file on your PC or double-click the
In-Field icon from your desktop.
2) If the icon is not on your desktop, double-click on the
executable file to launch the In-Field application.
The In-Field application will then be displayed on the screen.
To Next Page
Loading...
Need help?
General
