Page 14
Connections
GPRS12 Module SIM Card Connection
The PCS300 connects to your control panel providing wireless
communication capabilities to report system events to the
IPR512 Receiver. The PCS300 supports standard GSM
provider SIM cards. The SIM card contains all your cellular
telephone account information. In order to activate your SIM
card, you must contact your local GSM network provider.
Note: Prior to setting up your PCS300, it is important that the
Personal Identification Number (PIN) of the SIM card be
disabled. Refer to your cellular phone’s manual for more
information on how to disable the PIN.
To install the SIM card
Before installing the SIM card, remove the front cover of the
PCS300. If the cover is not installed, proceed to Step 1.
1) Slide the SIM card tray towards the top to unlock it.
2) Flip the SIM card tray open away from you. Open the SIM
card tray slowly to avoid damage to the tray.
3) Slide the SIM card into the tray with the cut-off corner
towards the top right.
4) Flip the SIM card tray closed towards you.
5) Slide the tray down to lock it into place.
To Next Page
Loading...
Need help?
General
