Page 4
Introduction
Chapter 1: Introduction
The PCS300 Universal IP Reporting Module provides security
control panels with wireless communication capabilities to
report system events via IP and/or GPRS (using the GPRS12
Plug-In Communicator Module). System events can be
reported to up to two Paradox IPR512 GPRS/IP Monitoring
Receivers.
Configuring and monitoring the status of the PCS300 is done
using the PCS300 Web Interface page (via a web browser).
From the PCS300 Web Interface page, up to two separate,
unique reporting sequences can be defined, each one linked
to a specific phone number. Each reporting method can be
programmed to perform a specific number of attempts before
switching to alternate backup reporting methods.
The PCS300 can also be programmed to send SMS text
notifications when an input is activated or deactivated and/or
when a trouble occurs. The PCS300’s firmware can be
upgraded on-site (IP) or remotely through IP or GPRS (via the
GPRS12 Module) using the In-Field Paradox Upgrade
Software application.
To Next Page
Loading...
