Paradox PCS300

Page 25
PCS300 Web Interface Page
Chapter 6: PCS300 Web Interface Page
This now completes the installation for the PCS300 Universal
IP Reporting Module. The next step is to configure the
PCS300 via the PCS300 Web Interface page. From the
PCS300 Web Interface page you will:
• Configure the PCS300
• Register the PCS300 to the IPR512 GPRS/IP Monitoring
Receiver
• Define reporting sequences
• Configure inputs and set SMS notifications
• Define additional configuration settings
In order to begin the configuration of the PCS300, a
connection to a computer on the network that has access to
the Internet is required. Once the configuration of the PCS300
has been defined through the PCS300 Web Interface page,
the PCS300 module is ready for reporting. For more
information on how to configure the PCS300 via the PCS300
Web Interface page, please refer to the PCS300 Operations
Manual.