42
SP+ Series Programming Guide
Event Call Direction Options
IP/GPRS Options
Table 37: Description of event call direction options (sections [802] to [804])
Option Description OFF ON Option Description OFF ON
Section [802]
Event Call Direction Options 1
1
Call tel. #1/monitoring rcvr. #1 for
arm/disarm report codes
Disabled Enabled
Section [803]
Event Call Direction Options 2
1
Call tel. #1/monitoring rcvr. #1 for
tamper/restore report codes
Disabled Enabled
2
Call tel. #2/monitoring rcvr. #2 for
arm/disarm report codes
Disabled Enabled 2
Call tel. #2/monitoring rcvr. #2 for
tamper/restore report codes
Disabled Enabled
3N/A 3N/A
5
Call tel. #1/monitoring rcvr. #1 for
alarm/restore report codes
Disabled Enabled 5
Call tel. #1/monitoring rcvr. #1 for
trouble/restore report codes
Disabled Enabled
6
Call tel. #2/monitoring rcvr. #2 for
alarm/restore report codes
Disabled Enabled 6
Call tel. #2/monitoring rcvr. #2 for
trouble/restore report codes
Disabled Enabled
7N/A 7N/A
Section [804]
Event Call Direction Options 3
1
Call tel. #1/monitoring rcvr. #1 for
special report codes
Disabled Enabled
= Default
2
Call tel. #2/monitoring rcvr. #2 for
special report codes
Disabled Enabled
3N/A
5
Call personal tel. # on zone alarm
(burglary/fire)
Disabled Enabled
6 Call personal tel. # on panic alarms
Disabled Enabled
7
Call personal tel. # on paramedic
alarms
Disabled Enabled
8
Call personal tel. # on panel power
trouble
Disabled
Enabled
Table 38: Description of IP/GPRS options (section [806])
Option Description OFF ON Option
Description
Section [806]
5 & 6 IP no service trouble feedback See options 5 & 6
See options 5 & 6 5 6
7User dialer reporting
As backup for IP/
GPRS reporting
Enabled
In addition to IP
reporting
OFF OFF Disabled
8 Enable IP/GPRS reporting
Disabled Enabled OFF ON Trouble only
= Default
ON OFF
When disarmed: trouble only; when
armed: audible alarm
ON ON Silent alarm becomes audible alarm
To Next Page
Loading...
Need help?
General
